Skip to product information
FSP Hydro PTM PRO 1350W ATX3.0(12V-2x6) unité d'alimentation d'énergie 20+4 pin ATX ATX Noir

FSP Hydro PTM PRO 1350W Power supply unit ATX ATXV3.1 Black

€239,27
Taxes included.

Shipping costs

Based on the items and your address. Exact costs are shown before payment.

30-day returns

On request, subject to conditions. Check the return policy and exceptions.

New ATX PSU Specifications
Updated ATX 3.0 specifications for the next-generation hardware power demands and ensure users get the most stable and cost-optimized performance possible with the highest power efficiency.

High Compatibility for High Power
The series comes with native PCIe Gen 5 connector and also supports 3 slots of PCIe 6+2Pin for graphic card, besides, 2 slots of CPU connector for higher performance.

Conformal Coating Application
Off-Wet, Off-Dust and Off-Stain

The conformal coating which protects the power supply and its internal components from dust, humidity, stains. The Hydro PTM PRO series are covered with conformal coating to guarantee reliable performance in a harsh environment and tested to work perfectly even in 95% relative humidity.

LLC Full-Bridge Topology with DC-DC Module Design
Hydro PTM PRO series features extremely tight voltage regulation to make the output voltage regulation under +/- 1% above 10% load change and offer you supreme efficiency and voltage stability.

Fully Modular Design for Quick and Easy Installation
Fully modular design simplifies installation and allows you to use only the cables you need, for a neater, cleaner build.

ECO Switch, Quieter and Longer Lasting Fan
When Eco Button is switched on, the PSU runs with lower power consumption and is whisper silent. The fan in the power supply will not operate when the power supply is under 30% loading for silent state.

80 Plus® Platinum Certification
Hydro PTM PRO series come with 80 Plus Platinum Certification which means your power supplies consume less heat and have a lower operating cost. The power supplies are guaranteed to operate at a minimum of 92% efficiency at 50% load of PSU rated power.

Compliance with IEC 62368
FSP Group features the latest in green power technology and provides additional safety approvals to keep its power supplies ahead of regulation changes. FSP has upgraded the majority of its power supplies to the newer IEC 62368 standards.

Supports Latest CPU Systems
Hydro PTM PRO fully supports high performance systems, complies with the most recent Intel, ATX12V V3.0 & EPS12V V2.92 standards.

Safety Protection
OVP (Over Voltage Protection), UVP (Under Voltage Protection), OCP (Over Current Protection), OPP (Over Power Protection), SCP (Short Circuit Protection), and OTP (Over Temperature Protection), a full guardian circuit protections to keep your hardware safe.

Specifications

Power

Total power1350 W
AC input voltage110 - 240 V
AC input frequency50/60 Hz
Power Factor Correction (PFC) typeActive
Number of +12V rail(s)1
Combined power (+3.3V)20 W
Combined power (+12V)1350 W
Combined power (+5V)20 W
Combined power (-12V)3.6 W
Combined power (+5Vsb)5 W
Max output current (+3.3V)20 A
Max output current (+12V)112.5 A
Max output current (+5V)20 A
Max output current (-12V)0.3 A
Max output current (+5Vsb)3 A
Efficiency92%
Power protection featuresOver current, Over power, Over voltage, Short circuit, Under voltage

Ports & interfaces

Motherboard power connector20+4 pin ATX
Number of SATA power connectors12
Peripheral (Molex) power connectors (4-pin)4
PCI Express power connectors (6+2 pin)4
CPU power connector (4+4 pin)Yes
Cabling typeFully-Modular

Performance

80 PLUS certification80 PLUS Platinum
PurposePC
Power supply unit (PSU) form factorATX
ATX version3.0
EPS version2.92
Bearing technologyFDB

Design

Product colourBlack
Cooling typeSemi-passive
Fan diameter13.5 cm
Number of fans1 fan(s)
On/off switchYes

Weight & dimensions

Width150 mm
Depth180 mm
Height86 mm

Documents

Fiche technique fournie par Icecat.

Vous aimerez peut-être aussi